iss. date material: drawn: checked: customer ref.: c/note finish: drawing no.: third angle projection all dimensions in mm not to scale c s/area: assembly drg: if in doubt - ask mm2 title: drawing number: sht of approved: this drawing and any information or descriptive matter set out hereon are confidential and copyright property of the harwin group and must not be disclosed, loaned, copied or used for manufacturing, tendering or for any other purpose without their written permission. tolerances x. = 1mm x.x = 0.25mm x.xx = 0.10mm x.xxx = 0.01mm angles = 5 unless stated name customer information sheet harwin europe (uk) mis @harwin.co.uk mis @harwin.com tel: 603 893 5376 fax: 603 893 5396 harwin asia mis @harwin.com.sg harwin usa tel: +65 6 779 4909 fax: +65 6 779 3868 tel: 023 9231 4545 fax: 023 9231 4590 x x y y max (cut-off tab) 0.25 gold minimum (45 finish) 3.50 6.68 4.30 2.10 1.30 1.60 3.00 1.00 r 0.55 r 0.45 2.2 'a' 0.25 2.0 'b' 0.25 0.15 1.17 gold minimum (42 finish) tin minimum (42 finish) part no. dimension 'a' 'b' m80-25300xx 1.80 1.65 m80-25400xx 1.34 1.00 m80-25300xx & m80-25400xx 5 5 datamate trio-tek female crimp contact reeled 24-22 awg & 28-26 awg b. m. kent bmk d 19.09.08 10159 m80-25300xx & m80-25400xx sht 5 of 5 specification: material: beryllium copper finish: 45 = 0.3 min gold, all over 42 = 3 min 100% tin and 0.3 min gold, selective plate all finishes = nickel underplate mechanical: insertion force = 2.8n max, 1.0n min withdrawal force = 1.8n max, 0.2n min durability = 500 operations environmental: operating temperature = -55 c to +125 c packing: reel (as shown), 15k/reel for complete connector specification, see component specification c040xx (latest issue) see above see above notes: 1. to be used with the following female housing: m80-454xx98 = housing only m80-455xx98 = housing + slotted jackscrew m80-456xx98 = housing + hex socket jackscrew m80-457xx98 = housing + reverse fix jackscrew m80-458xx98 = housing + guide and board mount 2. suitable for ptfe insulated equipment wire to bs 3g 210 type a, wire 22-28 awg, wire insulation 0.6mm- 1.1mm. 3. strip wire by 2.5-3.0mm for crimping. 4. suitable for processing with left side feed crimping press. contact datamate @harwin.com for details. 5. contacts are available loose, part number m80-28300xx for 24-22 awg wire and m80-28400xx for 28-26 awg wire, suitable for processing with hand crimp tool z80-255. order code: m80-xxx00xx wire size: 253 = 24-22 awg (0.22-0.34mm2) 254 = 28-26 awg (0.08-0.12mm2) finish: 45 = gold, all over 42 = 100% tin & gold, selective ra bmk section x-x section y-y see detail d 600 30 reeling detail reel interleave paper contacts detail d scale 5 detail d
|
